Photo diagnosis — Prototype

Homeowner: no mode switch, backend infers intent. Installer: "Photo Check" mode with a closed 8-item checklist (draft, to be confirmed by installation support). 屋主：不需要切换模式，由后端判断意图。安装商：使用 "Photo Check" 模式，按固定的 8 项检查清单逐项判断（清单为草稿，待安装支持团队确认）。

11:10📶 🔋

Smart Assistant

🔴

The light on my aPower is red

Diagnosis

Moderate

Fault type: Battery over-temperature
Alarm code: B-207

Possible causes: ambient temperature above 40 °C, blocked ventilation.

What you can do

Keep 30 cm clear around the unit.
Wait 30 minutes – the unit resumes automatically.

Still red after 30 min? Contact your installer – don't open the unit.

Type your message…

A · Homeowner device diagnosisA · 屋主设备诊断 Reuses diagnosis_result + troubleshooting. No opening / wiring steps for homeowners (X4). 复用 diagnosis_result 和 troubleshooting 卡片。不给屋主提供开盖或接线类步骤（X4）。
Q4X4

14:05📶 🔋

Smart Assistant

General通用📷 Photo Check

Switched to Photo Check

📷

Check an installation检查一次安装

Add 1–4 photos of the aPower installation. I'll check wiring, cable size, grounding, clearance, labels, routing, enclosure and environment.

Add photos to start

B · Installer "Photo Check" modeB · 安装商 "Photo Check" 模式 Enables the old TODO mode (agentType IMAGE_DIAGNOSIS). Text allowed; Send disabled until a photo is added. 启用原来留着 TODO 的模式（agentType IMAGE_DIAGNOSIS）。可以输入文字，但添加图片前发送按钮置灰。
TD-001/002

14:07📶 🔋

Smart Assistant

🔧

🏷

Check my installation

Installation check

2 issues

✅Wiring terminationphoto 1
❌Cable sizephoto 1AC cable marked 4 mm² – 10 mm² expected for 11 kW. Replace before commissioning.
✅Groundingphoto 2
❌Clearancephoto 2Right side ≈ 10 cm to the wall – manual requires ≥ 30 cm.
✅Labelingphoto 3
✅Cable routingphoto 1
✅Enclosurephoto 2
❔Environment—Not visible in photos – can't judge.

AI check results are for reference only. On-site standards apply.

C · install_check card (8 items)C · 安装检查卡（8 项） pass / fail / unknown only. Anything not visible = unknown (X6). Disclaimer mandatory. Sample numbers are illustrative. 每项只能是 pass / fail / unknown。照片里看不到的一律判为 unknown（X6）。免责声明必须显示。示例数值仅作示意。
SC-05V-07